Dimensional
Bore, wall thickness, outlet ID and thread pitch measured per cavity; Cpk recorded for cartridge bore.
Founded in 2019 in Wanjiang, Dongguan — the heart of China's adhesive and electronics supply chain. We mould, assemble and test under one roof, then ship on your terms.
We started with empty glue tubes and the small parts nobody wants to tool — adapters, caps, pistons, needle bases. That focus grew into a full dispensing stack: 1K and 2K cartridges, manual and pneumatic guns, static mixers from 83.7 mm to 369 mm, dispensing needles, and semi-automatic metering systems.
Because the cartridge, the mixer and the gun are made to the same drawing set, a ratio drift on one part does not show up as a failed bond three weeks later on your line.
In-house tooling for cartridges, mixers, caps and valve bodies. New geometry in 20–25 days.
Five lines for AB cartridge assembly, mixer winding and gun fitting, with torque-controlled fastening.
Buyer label, custom colour, ratio marking, printed graduations and retail-ready cartons.
EXW, FOB, CIF, FCA, DDP, DDU. USD / EUR / HKD. T/T, L/C, Western Union.
Every batch is checked against the drawing before it is packed. What we cannot test in-house, we send out and keep the report on file.
Bore, wall thickness, outlet ID and thread pitch measured per cavity; Cpk recorded for cartridge bore.
Gravimetric shot test on assembled 2K cartridges: ratio held within ±1.5% across the fill range.
Virgin PP / PE grades with batch certificates; food-contact and solvent-resistant options on request.
Sample cartridges burst- and leak-tested at 0.6 MPa; pistons cycled to confirm no back-flow.
Documents on request: material certificates, dimensional inspection report, gravimetric ratio report, carton packing list and photographs before dispatch. Third-party test reports (heavy metals, RoHS, food-contact migration) can be arranged at cost for programme orders.
Line photos, mould list, current material certificates and a sample of the SKU you are evaluating — sent in one folder.