Dispensing Needles, Blunt Tips & Syringe Adapters
Tips, nozzles and adapters for hand syringes and automated dispensers. Gauge, tube material and base type are selected together: a screw base stops blow-off under pressure, an all-plastic tip keeps metal out of ESD-sensitive assemblies. These are industrial blunt end dispensing needles, not hypodermic needles, and the hub colour is the gauge code rather than decoration.
How to choose needles & adapters
Base type before gauge
Screw (LK) bases resist blow-off above 0.4 MPa. Luer lock is faster to change and enough for low-pressure manual work.
Gauge sets the flow window
14–18 G for filled pastes and thick epoxies, 20–25 G for low-viscosity cyanoacrylates and underfill. Too fine a tip raises back pressure and causes drooling.
Metal-free where it counts
All-plastic tips avoid scratching and metal contamination on ESD-sensitive boards and in medical assembly.
Frequently asked questions
Which gauge should I use for epoxy?
14 G to 18 G for filled pastes and structural epoxy, where the filler will block anything finer. 20 G to 25 G for unfilled, low-viscosity resins and cyanoacrylates. If the bead starts to curl or the syringe bulges, the gauge is too fine for the viscosity.
What do the hub colours mean?
The colour is the gauge code, standardised across the industry: 14 G olive, 15 G amber, 16 G grey, 18 G green, 20 G pink, 21 G purple, 22 G blue, 23 G orange, 25 G red, 27 G clear, 30 G lavender. It lets an operator pick the right tip without reading the moulded number.
Are these hypodermic needles?
No. These are blunt end industrial dispensing needles with a flat or tapered outlet, used on syringes and dispensers for adhesives, solder paste and grease. They are not sterile and not intended for medical injection.
Luer lock or screw base?
Luer lock twists on and comes off fast, which suits frequent tip changes at low pressure. An LK screw base threads fully onto the hub and resists blow-off when a dispenser pushes high-viscosity material, so it is the safer choice on pneumatic equipment.
Need a drawing matched, not a catalogue part?
Send the cartridge, adhesive datasheet or sample and we will confirm the matching part, tooling cost and lead time in one reply.
Request a quote