2K Potting Machines, Meter Mix & Dispensing Systems
Bench and inline machines that meter, mix and dispense two-component adhesives by weight rather than by time. Each unit is configured around the part, the shot size and the fixture — there is no catalogue model, the machine is built to the drawing. If your process is potting and encapsulation rather than bead dispensing, the same platform runs it with a different valve and fixture.
How to choose dispensing systems
Weight control beats time control
Closed-loop weight verification catches ratio drift from viscosity change or a partly blocked mixer, which a timer-based unit cannot see.
Fixtures are half the project
Part location, needle approach angle and purge position drive cycle time more than pump speed does. Budget fixture design time with the machine.
Plan the adhesive supply
Bulk pails or 20 kg drums change the pump and the degassing setup. Tell us the pack size before the quote, not after.
Frequently asked questions
What is the difference between a meter mix machine and a dispensing robot?
A meter mix machine owns the ratio: it meters A and B, mixes them and delivers a shot. A robot owns the path: it moves a valve or a syringe around the part. Potting usually needs both, which is why the machine is quoted with the fixture rather than on its own.
How is the mixing ratio verified?
By weight, not by time. The controller checks the dispensed mass of each component against the target ratio and flags drift, which catches a partly blocked mixer or a viscosity change that a timer-based unit cannot see.
Can the machine run abrasive filled adhesives?
Yes, with the right wetted parts. Thermally conductive and ceramic-filled materials wear standard pumps and seals, so the pump type, seal material and mixer grade are specified against the filler load — tell us the filler and percentage before the quote.
Do you build the fixture as well?
Yes. Part location, needle approach angle, purge station and cycle time are designed with the machine, because the fixture usually decides the cycle time more than the pump does.
Need a drawing matched, not a catalogue part?
Send the cartridge, adhesive datasheet or sample and we will confirm the matching part, tooling cost and lead time in one reply.
Request a quote